At The Center Of Each Sphere

AT THE CENTER OF EACH SPHERE
By: Miles Pelton

The knowledge (what we think we know) compiled by mankind has been derived through the application of reasoning (a priori) when studying and analyzing the behavior of forces embodied in the creation processes. Mankind’s efforts to extract understanding of that knowledge has been bedeviled from the outset by an inability to accept and acknowledge that the evolutionary creation process proceeds from a reservoir of an eternally sustained affinity producing energy that is the cause of all things. As a consequence, knowledge fundamental to all things, whether physics, biology, religion, psychology or medicine, is and has been overlooked or has produced misinterpretation.

Through reasoning supported by analytical research, the potential of the human mind has been able to recognize that the components of which all things are made are bound together by a “divine in nature force”. Protons, neutrons and electrons are bound together to produce atoms that then become the material of which all things are made and the binding component embodied within those atoms is conveyed through each succeeding step in the creation building process. These forces exist and are acknowledged to exist. However, our eyes have been closed to recognizing and acknowledging the cause, the producer of those forces. Newton, with his theory on gravitational attraction and Einstein, with his infamous “energy equals mass” equation, and The Standard Model with the Higgs ubiquitous quantum field, came very close but all failed to recognize that the source of the energy that produces those forces emanates from the “core center” of the universe, the point where creation began, the point at which the “big bang” would have taken place. It stands that to be valid, all knowledge must be reconciled to that conclusion.

Evolution Step 0ne; The Causing Power
To understand the fundamentals and the physics principles involved begin by visualizing a reservoir of a "divine in nature energy" with an affinity-for-self power that is eternally sustained, a substance not unlike that described as the Almighty Creator or, in other words, a singularity. Then visualize that the energy of that reservoir is divided into tiny precise like-strength bits so that each bit constitutes one unit of the power of the eternally sustained reservoir of the affinity energy. With an affinity-for-self power as a characteristic behavior inherent in each like-strength bit, then the reservoir after division into bits has the same affinity power as before division. However; after division the collective power of the reservoir has acquired the ability to attrect and establish a binding force with each of the individual bits and each bit has acquired the power to attract and thereby establish a binding force with other bits. Then recognize that an isolated assembly of bits acquires cumulatively the affinity attraction power of the assembly with an affinity power equal to the number of bits in the assembly. That is, the individual bits retain the one unit of the affinity-for-self power inherent in the singular source substance. Finally consider that the affinity power radiated from the core center of the reservoir, whether in singularity form or in the form of like-strength bits, is real thereby establishing and maintaining a charge relationship or ubiquitous quantum field.

Now envision that the process of dividing the "affinity for self" energy into bits was accomplished by adding a comparable "repulsion for self"component giving each bitboth an attraction and a repulsion force producing potential. That combination of behavior producing potential is responsible for the introduction of distance ( or spsce-time) between bits. Both potentials act out of the center of each bit as well as each assembly of bits to produce the fundamental forces of particle physics as imbedded in the creation process.

That seemingly simple act of introducing space-time between creation’s energy bits released a chain of fundamental physics principles. First and foremost: recognize that each of the energy bits contribute one unit of affinity-attraction charge (mass by current convention) that cumulatively gives an assembly of such charges, an affinity-attraction intensity equal to the sum of the assembled energy bits, which charge would act from the center of the assembly resulting in the creation of a sphere. Second: since the volume of a sphere increases exponentially as the radius increases, the intensity of that radiated charge and thereby the amount of such affinity-attraction charge available to produce force is correspondingly less as the radius distance increases (the inverse square rule). Third: with less than full affinity-attraction charge intensity applied in binding energy bits over a distance, the excess charge intensity provides the ability of the charge center of such assembly to radiate its charge to bind with energy bits beyond the periphery of the assembly. Fourth: recognize as discovered by Charles Coulomb (1736-1806) that like charged energy bits repel each other and unlike charges attract. Then recognize that those reactions provide the mechanism by which physical force is applied by one body on another over distance without the presence of a physical medium through which to act, as is involved in the binding of fundamental energy bits to form neutrons, protons, atoms, molecules and thereby all things including galaxies and the universe. Fifth: recognize that the introduction of distance brought with it the element of time since time and speed are factors in defining the act of traversing distance. Sixth: recognize as significant that the intensity of the affinity-attraction charge of the fundamental energy bit is continuously sustained and not depleted in the course of producing binding force, with the charge radiated out of the core center of the universe.

Evolution StepTwo; Energy to Matter
To visualize the process involved in the transformation of fundamental energy bits into matter, the process must be followed step by step. The process begins when the affinity-attraction points of two of the dispersed bits are drawn together and their assembly causes the formation of a new “assembly specific” charge center. Meanwhile, the repelling charge radiated by each of the two energy bits is deformed into the shape of a dome or half sphere. Then, as additional bits are pulled into the assembly, their affinity-attraction cores are drawn together around the charge center of the new assembly, while the repelling (like) charges they radiate are squeezed (like the sections of an orange) to form a sphere. A point is reached (after 1,840 energy bits are assembled) where the charge center of the assembly no longer has the power to overcome the opposition involved in forcing the compaction of more energy bits. The resulting assembly, known as a neutron, has a physical presence. It has mass and it occupies space but is not a stable stand-alone body. In a stand-alone configuration free of intervention by other forces, the inter-action of the opposing attraction and repelling forces continue. Eventually (approximately 20 seconds standing alone under the circumstances existing at the surface of the earth) the affinity-attraction force of the assembly succeeds in overpowering the opposing inter-bit repelling forces resulting in the transformation of the neutron into a proton.

Evolution Step Three; The Proton Charge Generator
Neutron to proton transformation is a step-by-step evolution process in which the affinity-attraction power of the charge center of the assembly compacts 1,840 energy bits one by one. As distance between the charge center and the individual energy bits is eliminated, a full unit of affinity attraction (binding) power is applied. However, after 1,839 bits are fully compacted the assembly charge center has only one unit of affinity-attraction power remaining and because distance exists between the assembly charge center and that last energy bit, the remaining one unit of power is incapable of producing the attraction force needed to overcome the repelling force. At that point, the repelling force producing component of the 1,840th energy bit is seperated from the affinity producing component and squeezed out of the assembly with two profound consequences. First: the ejected repelling component of the 1,840th energy bit, now called an electron, has acquired a new proton unique charge relationship since it now is one unit of a 1,840 charge unit proton system. That relationship results in the development of a "1,840 to 1" attraction potential (charge) between the cumulative repelling component of the proton assembly and the ejected repelling component of the electron. Second: The proton assembly retains the cumulative potential to produce an affinity (gravitational attraction) force. In other words, with that transformation, proton behavior has acquired the ability to produce (generate) a proton unique electron attraction potential in addition to retaining its fundamental affinity (gravitational attraction) force producing potential.as demonstrated by Coulomb, that provides the binding by which atoms, molecules and thereby all things are made. With that transformation, the assemblies called protons acquired a force generating capability that is unique to protons and assemblies of protons that is in addition to the gravitational attraction capability created by the fundamental affinity-attraction capability.

Explanation of proton behavior is not complete without pointing out several less obvious but nevertheless important characteristics. Recognize that when constricted, the 1,839 energy bits (by convention called neutrinos) form a ring of like charges that surrounds the charge center of the new proton assembly with its 1,840 like charges. That configuration is significant in two respects. First; a repelling force is produced along the boundary between the outer ring of 1,839 like charges and the inner core of 1,840 like charges, not unlike the repelling forces between the stator and the rotor of an electric motor, causing the proton charge center to spin with respect to its outer ring. Second; with the proton charge center surrounded by the fully constricted energy bit segments, the proton charge center radiation is confined to the core formed when the energy bit segments were assembled, which coincides with the axis along which the charge center spins. Consequently, the spinning proton charge center causes the radiated proton charge to spin or spiral (in the form of a helix) as it forms an endless polarized ring of a proton charge. This proton unique behavior is instrumental in producing behavioral characteristics revealed as electrical-magnetic force, that are involved in electric motors, spiraling weather systems and rotating celestial bodies.
.
Evolution Step Four; Atoms and Atomic Power
Development of the various type atoms (elements) is also a step-by-step evolutionary process that begins with the fundamental proton (Hydrogen as Protium). The proton is unique in that while having the fundamental affinity-attraction (gravitational attraction) power, it also has a proton unique charge intensity of 1,840 units with which to bind electrons and because distance is near negligible, strong binding forces are developed. For example, for that reason protons aggressively attract heat (Hydrogen changes state from a solid to a vapor at near –260 degrees C.) as well as the electrons of other atoms and neutrons. That factor is so dominant that in the atmosphere of our world, free protons (hydrogen atoms) are rare except as diatomic molecules. Even the proton-neutron-electron (Hydrogen as Deuterium) is rare because that configuration aggressively unites with other elements to form compounds.

The next step in evolution requires the union of protons and neutrons that form the “building block” for the progression of atom development. Applying physics principles a priori along with the knowledge thus far revealed, leads to the conclusion that neutrons bond with hydrogen (H2) molecules to produce an assembly with an affinity intensity of sufficient strength to pull in the charge generating center of the two protons along with the electrons that are bound to those charge generating centers, That new assembly with 2 protons, 2 neutrons and two electrons is not only now a helium atom but is also the foundation (nucleus) for all subsequent atomic development.

It is important to recognize that there are two different independently acting attraction forces at play in the binding of the components of atoms. The first force is the fundamental affinity-attraction (gravitational attraction) for energy bits (neutrinos) that is “inherited” from the elemental energy bit with that intensity, equal to the sum of the number of energy bits employed in making the atom, cumulative and acting from the core center of the atom. The second force is the unique proton attraction for electrons created in the process of neutron transformation. The magnitude of the proton-electron attraction intensity of an atom depends upon the number of protons in the atom assembly where there is one electron attracting charge for each proton with 1,840 units of intensity. The magnitude of these intensities applied in binding an electron depends not only upon the charge intensity at the center of the atom but also upon the distance between the charge center and the electron under consideration since the charge intensity diminishes according to the “inverse square rule.” Also, since the number of protons and the distance between the atom charge center and the electrons is unique for each type atom, the magnitude of charge intensity applied in producing binding force is likewise unique for each electron bond. It is also important to recognize that the core center intensity applied in establishing a bond over distance is less than 100 percent of the intensity available at the core center. Uncommitted affinity attraction intensity (gravitational attraction) at the core center of an atom has the potential to attract and establish bonding with the neutrinos of other protons and neutrons. At the same time, the uncommitted unique proton produced charge establishes bonding with the electrons of other atoms. This is the key to the assembly of all things.

Evolution Step Five; Energy Transformation
Application of intelligent reasoning (a priori) to the knowledge thus far exposed substantiates the conclusion that it is the behavior characteristics of the energy bits fundamental to creation that powers the proton unique charge. In other words, it is the energy that powers the fundamental energy bits that is transformed through the proton system to produce the various forms of energy employed in creation. And it is the proton unique charge that powers the binding of electrons, which is in turn, fundamental to the assembly and functioning of the universe. Bear in mind that the proton charge is an unending one-direction process that radiates out of an atom charge center at the speed of light measured to be 186,000 miles per second. Then recognize that at a given instant, the radiating charge and the electron binding force produced, are the action components of the atom to electron bond and thereby, the action components responsible for the assembly and functioning of the universe.
The unique power of the proton is revealed through consideration of electron bonds. Take as an example the flow of electrons through the filament of an incandescent light bulb where a “generated charge” force is applied to cause electrons to flow but where an “atom core center to electron bond” and a “proton to electron bond” are broken at the instant each electron passes from one atom to the next with each broken bond released to produce heat and light. To give some perspective, recognize that it takes 6,240,000,000,000,000,000 electrons flowing by a point in a conductor each second to equal one ampere, therefore a priori, 6,240,000,000,000,000,000 atom to electron bonds and 6,240,000,000,000,000,000 proton to electron bonds per second are broken at each point in the filament of an incandescent light bulb with the passage of one ampere, which is the equivalent of a one hundred watt light bulb.

Heat and Light
Analysis from this perspective provides insight into the origin and the mechanism by which heat and light are produced by the energy released when atom-electron bonds are broken. First: it is important to recognize that heat and light are affects or reactions produced in response to the action of the energy released with the fracture of a two component atom core center to an electron bond. Second: it is important to recognize that once the atom-electron bonds are broken the two components involved in establishing those bonds are free to act or react independently. Third: recognizing that the light producing component (photons) that radiate from the point of release mimic the behavior characteristics of the proton unique charge involved in establishing electron bonding, it is then reasonable to conclude that photons are the atom to electron charge at the instant an electron bond is broken. Fourth: recognize that the force component of atom to electron bonds are, at a point in time such as the instant a bond is broken, in reality one unit of the affinity attraction energy being applied to produce the binding force, or as previously rationalized, one unit of mass. Fifth: recognize that absent a repelling “like charge”, the force-producing component of broken electron bonds is attracted without opposition to the atom or molecule presenting the most powerful affinity-attraction intensity. Without the “like charge” opposition and the accompanying “inverse square rule”, a full unit of the atom or molecule charge center affinity-attraction intensity would be committed, thereby reducing the intensity available for bonding electrons.

Study of the behavior of heat has established that the heat component of the atom-electron bond is not revealed except or unless it is attracted to an atom. Also that the acquisition of heat by atoms and molecules causes their expansion even to the point where their own inter-atom inter-molecular bonds are fractured producing oxidation, combustion or even, depending upon the magnitude and rapidity of bond failure, explosion. Through the application of reasoning (a priori) it must be concluded that it is the force-producing component of proton to electron bonds that when released after the bonds are broken, produces the effect called heat. The amount of heat energy acquisition necessary to produce electron bond failure in an atom or molecule and the rapidity of bond failure, depends upon the composition of the atoms or molecules involved. It is important to recognize that the described process applies whether the result is called oxidation, combustion, metabolism, flesh burns, conventional explosion, atomic explosion or nuclear explosion. Even if an object is mechanically fragmented, broken atom to electron and proton to electron bonds release heat and light.

Study of the behavior of light establishes that light and the energy (photons) that produces the effect called light are not visible. That is, the energy that produces the effect called light has no physical component including color-producing pigments. The effect called light is revealed when passage of the radiated charge component of broken atom-electron bonds contact objects whose composition includes molecular alignment in the form of pigments, which alignment blocks the passage of photons. When bathed with blocked photons (when illuminated) the various pigment molecular alignments are perceived by human eyes (vision) as one of a combination of several colors. That is, the color of an illuminated object revealed in response to being illuminated, depends upon the structure of the pigment molecules that have been illuminated and the reaction produced by the particular intensity of the energy contained in the illuminating photon. For example: carbon molecules (assembled atoms) function as a pigment that is interpreted as the color black and oxygen, when concentrated as in liquid form, produces a reaction the eyes interpret as blue.

Electricity and Magnetism
Alessandro Volta (1745-1827) discovered that chemically induced ionization of an assembly of atoms (as in a battery) created a difference of charge potential that caused electrons to “flow” over a conductor connected to provide a means for the difference of charge to equalize. Michael Faraday (1791-1867) discovered that the force field of a magnet moved in close proximity to the conductor caused the “flow” of electrons in the conductor. Hans Oerstad (1777-1851) discovered that the magnetic force field produced as a consequence of an electric current flowing over the conductor of an electric system produced the same effects as the force field of the Faraday magnet. Oerstad’s experiment also demonstrated that the intensity of the magnet field produced as a consequence of an electric current is in proportion to the number of electrons involved in the flowing current. His experiment also provided evidence that the magnet force field is electron specific in the form of a ring or disc of energy spinning around the conductor with the conductor as its center and with the direction of rotation dependent upon the direction of current flow in the conductor.

The key to opening the door to understanding the mechanism involved in the electro-magnetic process rests with realization that the electrical system of which the conductors are a part, is in fact an insulated-isolated assembly of atoms (albeit relatively slim and lengthy), with its own charge center just as any other assembly of atoms. Then recognize that proton unique electron attracting charges can be impressed upon the charge center of the insulated-isolated electric system whereupon, each charge bonds with an electron of an atom of which the conductor is made. Then, bearing in mind that the electrons are like charges so repel each other, recognize that as the proton unique electron attraction charges travel along the electric system conductor in their quest to achieve equilibrium, the electron to which bonded is dragged from atom to atom along the conductor. With this understanding, it becomes apparent that the magnet force field (that exists coincident with the movement of electrons along an electrical conductor) and the proton unique electron attraction charge impressed upon the electric system charge center are one and the same. It is further apparent that the proton generates the charge that is fundamental to heat, light, atomic bonding and electro-magnetism.

Geo-Magnetic Force Field
The earth is a multitude of atoms assembled into an insulated-isolated body where therefore a “core or charge center” of an affinity (gravitational) attraction charge exists with power equal to the total of all the fundamental energy bits (neutrinos) involved in the assembly of the earth, including it’s atmosphere and moon. In addition, a proton unique charge acts from the center of the earth assembly equal in intensity to the sum of all the proton charges involved in the formation of the atoms employed in the formation of the earth. It is important to recognize that two charges (gravitation and the unique proton-electron attraction) act independently out of the center of the earth and that in both instances the earth constitutes an insulated-isolated assembly or body.

Recognize that while gravitational attraction acting from the center of the earth is exerting force upon the individual bits of which the components of atoms are made, that action is being resisted by physical contact with surrounding matter as well as by the proton powered binding of electrons that hold atoms and molecules together. When the proton powered bonds fragment, the unique proton generated charge energy that produced those bonds is released to produce the effect called heat, which in turn causes the expansion of other atoms and molecules with additional bond fragmentation. Understandably, the magnitude of the gravitational force and the characteristics of the atomic action changes progressively with distance from the earth’s periphery with some stratification due to the mechanics involved in atom and molecule composition. Specifically, atoms and molecules with weaker bonds would fragment sooner, while atoms with multiple bonds would release more heat producing energy. Once started, the described process would progress through stages to eventually reach a state of self-perpetuation.

The first stage encompasses the atmosphere and the outer crust where atomic change is essentially limited to the change in state of certain elements from vapor to liquid or solid state. The stratum of the next stage (in the bond fragmenting/heat release process) has been designated as the mantle. Bond fragmentation and heat release does not reach a self-perpetuating state in this stratum either except in isolated areas subject to unusual pressure, such as where the magma of volcanoes is produced. It is expected that the bond fragmenting and heat release process would cause some change in the kinds of compounds existing in the mantle area especially as involves carbon-based components.

The process reaches full electron bond fragmentation action in the stratum designated as the outer core where the intensity of the bond fragmentation releases sufficient heat generating energy to saturate the electron attraction capacity of the involved protons. At that point, corresponding with maximum possible temperature, the full electron attraction power of the protons is committed to attracting heat-producing energy. Whereupon, without electron attraction bonds available to be fragmented, the creation of additional heat ceases.
Before proceeding with the explanation of how the geo-magnetic force field is created, it is important to review the behavior of protons and the proton generated charge.

The proton charge is a polarized spiraling ring of energy that is radiated from one pole of a proton and returns via the opposite pole, just as lines of the earth’s magnetic force field. The strength of the force exerted by a proton charge diminishes as the square of the distance over which the force acts. Each proton continuously produces one such proton charge. The strength of charge by an assembly of protons has the potential to equal the cumulative sum of all protons involved when those protons are aligned. Further, the strength available to “reach out” beyond the periphery of the assembly depends upon the electron attracting power remaining after “self binding” is accomplished. For example, where the protons of an assembly of protons are saturated, as are the protons of the inner strata of the outer core of the earth, the power of the electron attracting proton charge is fully committed to the binding of the bits of heat producing energy that had been released by the fragmentation of electron bonds. Therefore, the inner core stratum was created as a unique assembly of highly compacted protons with no bonded electrons and no energy with which to attract electrons.

Under the influence of the magnetic force field of the sun, the power-saturated protons of the inner core were aligned so that their charges act in unison. Then, since radiated proton charge lines of force (whether in the act of binding electrons or as lines of magnetic force) and the “like charge” bits of the energy that produces the effect called heat repel each other and the heat energy absorbed by the inner core protons is driven back into the outer core stratum. Proof of the repelling action between magnetic force and heat energy bits has been demonstrated by the Z-machine nuclear physics research project conducted at the Sandia National Laboratories as well as by the reaction of the solar wind upon the earth’s magnetic field. Therefore, freed of the job of binding both electrons and the energy bits that produce heat, the full power of the inner core protons is radiated as magnetic lines of force.

Weather
It is the behavior of water molecule that is responsible for the phenomena called weather and it is the behavior of the hydrogen and oxygen atoms and the interaction of the forces involved in their assembly into atoms and subsequently into molecules that establishes the behavior characteristic of water. First, consideration is given to hydrogen atoms consisting of one proton and one electron. The distance from the charge center of the hydrogen atom (a proton) to its orbiting electron is very short so the reduction in attraction intensity applied in binding its electron (as a consequence of the inverse square rule) is relatively slight. That is, there is not a lot of attraction intensity remaining at the atom charge center with which to attract other electrons, but with such a small radius its attraction for other electrons, as well as heat, is a significant factor. That is why a hydrogen atom tends to unite with another hydrogen atom to form an H2 molecule. That is also why hydrogen changes to the gaseous state at such a low temperature. That is also why H2O molecules (water) can form large fluid molecule assemblies such as rivers, lakes and oceans and that is why water vaporizes and re-condenses as in the formation of clouds.

The oxygen atom has six electrons in an orbit (a circle with a common radius) that has space to physically accommodate eight electrons. In other words, equal intensity binding force is applied to each of the six electrons. Because of the length of the radius, less than full attraction intensity is applied in binding the six electrons, which means there is a quantity of attraction intensity available to bind other electrons as well as heat producing energy bits. Therefore, the configuration and behavior characteristics of the oxygen atom will (and does) attract the electron of two hydrogen atoms, whereupon the attraction intensity applied in binding the hydrogen atom electrons is the same as is applied in binding its own electrons. The greater significance of that binding process is manifest in the ability of the H2O molecule (water) to handle large quantities of heat and a large temperature range without damage.

In so far as weather on earth is concerned, it is the ability of water to change into a vapor capable of existing within the environment (includes gravitational attraction) of the earth’s atmosphere that establishes the mechanism that produces that capability. Water molecules at the surface of a body of liquid or solid water, are exposed and therefore attract “heat” from its surroundings. Because of the sensitivity of the hydrogen atom, it takes only a small amount of “heat” to weaken electron binding sufficiently that the bonds between the protons of adjacent H2O molecules (called the Hydrogen Bridge) are fractured thereby freeing those molecules from the liquid state. The freed molecules, now in the vapor state, take their place in the earth’s atmosphere in response to their relative density, the force exerted by the earth’s gravitational attraction and the law developed by Amadeo Avogadro (1776-1856) concerning the behavior of molecules in the gaseous (vapor) state.

When analyzed, Avogadro’s law says that molecules of a particular element when in the gaseous state, constitute “like charges” that repel other “like charges” but do not interact with the molecules of elements with which they have no charge relationship. Meanwhile, being restrained by the gravitational attraction of the earth acting in opposition to the inter-molecule repelling force, the molecules of “like charge” form an assembly in its own right, the behavior of which is in response to the forces to which subjected. The resulting “Avogadro’s assembly” of water vapor molecules often covers hundreds of square miles that may be visible as a cloud or an assembly of clouds and is foremost a self-sustaining structure that is essentially floating in the earth’s atmosphere in a manner not unlike a ship at sea. Also, the structure thus formed, lives. It can “absorb” heat energy from its surrounding thus causing expansion, reduced density, and an increase in physical size. It can release heat energy to its surroundings, thus causing self-constriction (condensation) and increased density even to the point that clusters of high density (raindrops) are pulled out of the vapor structure by the force of the earth’s gravity.

All of the preceding has been studied and well documented but there is more to the process that has not been recognized. Recognize that water absorbs heat energy, expands, changes to vapor, rises, cools, ejects energy (including lightning) condenses and changes back to a liquid state. But there is more to it than that. Liquid water changes to vapor because heat energy caused the atoms involved to divert their strength from binding electrons to binding heat energy bits that had been freed (released) when atom to electron bonds somewhere had been fragmented. They had lost their power to attract and bind. In the process, vaporization occurred because atom to electron bonds of the water molecule were fragmented resulting in the release of their binding energy as bits of heat energy, which added to the heat energy available for “absorption”. As the expanded water vapor rises in the cooler atmosphere, heat energy is released causing condensation, which occurs when atom to electron bonds are re-established. Note that the energy involved in re-establishing the atom to electron bonds is not the heat released because heat causes the expansion and fracturing of such bonds. Analysis in this manner brings realization that the energy involved in re-establish the atom to electron bonds comes from the same source from which it originally came. That is, it is radiated from the center of the universe and re-radiated by protons as the proton unique charge. That leads a priori, to the conclusion that a weather system cloud is a generator of heat energy bits that are freed from fragmented atom to electron bonds. It also leads to the realization that lightning discharged from weather system clouds is the discharge en-masse of accumulated heat bits (cooling), which action is accompanied with condensation and rain.

The independent “Avogadro assemblies” of like charged water molecules are also exposed to forces produced by the spiraling lines (rings) of proton generated charges that act cumulatively from the earth’s charge center as a magnetic force field. Recognize that the lines of the earth’s magnetic force field are in actuality rings of proton-generated charge that exit and reenter the earth’s core along the now designated north and south polar axis. Then recognize that the “lines” of charge spiral counterclockwise as they exit the earth’s surface in the northern hemisphere and clockwise as they reenter the earth’s surface in the southern hemisphere and, when in the process pass through “Avogadro’s assemblies” exert force causing them to rotate.

Related Phenomena
There is material in the universe called “Dark Matter” that is not visible. Given the stated behavior characteristics of light, the existence of “Dark Matter” and “Black Holes” would be expected. Keep in mind that the fundamental unit of mass that is made into neutrons, protons, electrons and from there, atoms, molecules and all other things, is the energy bits that have been ejected from the universe energy reservoir. Then remember that it is the proton unique energy acting out of the center of atoms to bind electrons that when released produces illumination and the ability to be seen. Therefore, mass that exists as fundamental energy bits that have not been transformed into protons is incapable of producing atom to electron bonds and therefore, incapable of producing photons. Further, since illumination occurs when objects with pigment are illuminated and since pigments are atoms assembled into molecules, fundamental energy bits cannot be made visible with the energy that produces light. Then, a priori, it must be concluded that “Dark Matter” is fundamental energy bits and that “Black Holes” are the core center of a colloidal assembly of many such bits.